搜索结果: 1-15 共查到“光电子技术 fabrication”相关记录17条 . 查询时间(0.045 秒)
2018年SPIE先进微/纳米光学和光子学制造技术会议（SPIE Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI）
2018年 SPIE 先进微/纳米光学和光子学制造技术 会议
2017/10/27
2018年SPIE先进微/纳米光学和光子学制造技术会议（SPIE Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI）。
Fabrication of mode field converter in H 2 -loaded SMF-28e using CW-Ar + laser
Fiber Bragg gratings photosensitivity Fiber optics components
2015/5/26
We report on mode field diameter changes of -31% due to UV-induced core refractive index changes of ≤10 -2 in SMF-28e leading to a loss reduction of 0.83 dB between SMF-28e and a dispersion compensati...
Fabrication and Demonstration of a Pure Silica-Core Waveguide Utilizing a Density-Based Index Contrast
Glass waveguides Thin-Films Other Properties
2015/5/26
We report a novel approach for creating a dopant-free pure silica-core waveguide(PSCW) for chip-scale waveguides with the goal of reaching fiber-like losses on-chip.Stoichiometric silica films were us...
Fabrication and Characteristics of Cr-Doped Fibers Employing Powder-in-Tube Technique
Fiber design and fabrication Fiber materials Fiber optics amplifier oscillators
2015/5/26
The fabrication of Cr-doped fibers (CDFs) using fiber drawing-tower combined with non-silica powder-in-tube (PIT) technique to achieve the active application of chromium ions in fiber is demonstrated ...
Fabrication of Microfiber-Based Bragg Gratings with Ultraviolet-Light Exposure
Fiber Bragg gratings Integrated optics devices Microstructure fabrication
2015/5/22
We fabricated microfiber-based Bragg gratings with ultraviolet-light exposure. Bragg reflections are observed for gratings with diameters of several micron-meters. The dependence of Bragg grating char...
Fabrication of a temperature-insensitive transverse mechanical load sensor by using a photonic crystal fiber-based Sagnac loop
birefringence load sensor photonic crystal fiber (PCF) Sagnac interferometer
2013/5/27
An optical fiber transverse mechanical load sensor is fabricated by using a short section of a solid core photonic crystal fiber (PCF) which is inserted inside a Sagnac fiber loop. An initial transver...
Fabrication of fiber Bragg gratings in 40 μ μm diameter low GeO 2 silica fiber using cw-Ar + -laser
Fiber Bragg gratings photosensitivity Fiber optics components
2015/6/4
Mean index changes >10 -3 were obtained in non-hydrogen-loaded ~3% GeO 2 -doped silica fibers with a 9/40 μm core/cladding diameter using a cw 244-nm-Ar + -laser. Core stress changes are positive indi...
Fabrication of a highly nonlinear tellurite complex microstructure fiber for supercontinuum generation
Fiber design and fabrication Nonlinear optics Supercontinuum generation
2015/6/4
A dispersion controlled highly nonlinear tellurite complex microstructure fiber whose chromatic dispersion is flatter than that of the previous ones is realized. Broad supercontinuum generation was de...
Broadening Adjustable Range on Post-Fabrication Resonance Wavelength Trimming of Long-Period Fiber Gratings by Heating
Broadening Adjustable Range Post-Fabrication Resonance Wavelength Long-Period Fiber Gratings
2015/7/16
The adjustable range of resonance wavelengths of long-period gratings was broadened toward the blue side by heating, and the mechanism was studied. The large blue shift, 41 nm, was obtained by heating...
Laser Processing for Fabrication of Silicon Nanoparticles and Quantum Dot Functional Structures
Laser ablation Silicon Nanoparticles
2009/6/12
We have developed technologies for fabricating nanoparticles of high purity and homogeneous size, and for synthesizing them into new quantum functional structures, such as fine definition luminous dev...
Synthesis of Metal Nanoparticles and Fabrication for Functional Micro-Composite Circuits by Laser Ablation
Nanoparticle Pulsed laser ablation Differential mobility analyzer
2009/6/12
The purpose of this research is to develop new fabricating technology for a heat-resistant microcircuit substrate with high quality nanoparticles synthesized using Nd:YAG lasers. The nanoparticles of ...
Fabrication of High Quality Poly-Si TFTs by Using Ar-Laser Irradiated Sputter-Si Films
Polycrystalline Si Sputtering Ar-laser
2009/6/9
Precursor a-Si films are deposited by RF planar magnetron sputtering in argon gas at 200 °C substrate temperature. Properties of the a-Si films have large dependences on sputtering gas pressure. Sheet...
Preface to Topical Papers on Crystallization of Silicon Using Laser Annealing and Its Application to Electronic Device Fabrication
Silicon Laser Annealing Electronic Device Fabrication
2009/6/9
Preface to Topical Papers on Crystallization of Silicon Using Laser Annealing and Its Application to Electronic Device Fabrication.
Fabrication and Characteristics of Ball-Shaped Sealing Caps for Infrared Hollow Fibers
Hollow fiber Sealing cap Er:YAG laser
2009/6/8
To seal the end of hollow fibers for medical uses, a sealing cap for Er:YAG laser light is fabricated by fusing a glass ball onto the end of a glass capillary. The cap has a focusing effect and the fo...
Fabrication of First-Order Periodically Poled MgO: LiNbO3 Bulks for Ultraviolet Light Generation
QPM SHG Domain inversion
2009/6/8
We propose a novel method for controlling the shape of a short period domain-inverted structure utilizing a multi-pulse poling method. Using this technique, periodically domain-inverted structures wit...