搜索结果: 1-5 共查到“机械制造工艺与设备 3-D milling”相关记录5条 . 查询时间(0.015 秒)
The optimal cutting parameter design of rough cutting process in side milling
Machining Side milling Grey-fuzzy logics
2010/2/4
Purpose: This paper is focused on the optimal cutting parameters design of rough cutting processes in side milling for SKD61 tool steels.Design/methodology/approach: The fuzzy logics can be a proper b...
Modification of Cr-Mo low alloyed steels by addition of Mn via mechanical milling
Powder metallurgy Mn addition Master alloys
2010/2/4
Purpose: The PM industry is in continuous development due to the necessity to increase its potential and competitiveness. This fact and the demand for substituting certain alloying elements used so fa...
A Study of the Effects of Machining Parameters on the Surface Roughness in the End-Milling Process
Surface Finish ANOVA Pareto Chart Surface Roughness
2010/1/14
A set of experiments designed to begin the characterization of surface quality for the end-milling process have been
performed. The objective of this study is to develop a better understanding of the...
Barium ferrite powders prepared by milling and annealing
X-ray phase analysis R-VSM High-energy ball milling Barium ferrite
2010/2/22
Purpose: Microstructure and magnetic properties analysis of barium ferrite powder obtained by milling and heat treatment.Design/methodology/approach: The milling process was carried out in a vibratory...
Variation cutting speed on the five axis milling
Machining Effective cutting speed Multi-axis milling Tool orientation
2010/2/22
Design/methodology/approach: The methodology has consisted to dertemine cutting speed of each mode of tilt tool in five axes machining, and of proving a series of configurations and parameters combina...