搜索结果: 1-5 共查到“机械工程 Characteristic”相关记录5条 . 查询时间(0.078 秒)
Configuration Selection for Reconfigurable Manufacturing Systems by Means of Characteristic State Space
reconfigurable manufacturing system configuration selection
2011/8/3
The configuration selection for reconfigurable manufacturing systems(RMS) have been tackled in a number of studies by using analytical or simulation models. The simulation models are usually based on ...
Crystallographic Characteristic of Intermetallic Compounds in Al-Si-Mg Casting Alloys by Using Electron Backscatter Diffraction
Al-Si-Mg alloys intermetallic compound electron backscatter diffraction (EBSD)
2011/8/3
The Al-Si-Mg alloy which can be strengthened by heat treatment is widely applied to the key components of aerospace and aeronautics. Iron-rich intermetallic compounds are well known to be strongly inf...
滚动轴承摩擦力矩的非线性特征（Nonlinear Characteristic of Rolling Element Bearing Friction Torque）
滚动轴承 摩擦力矩 时间序列
2009/5/22
以混沌理论为基础，通过试验研究滚动轴承摩擦力矩时间序列的非线性特征评估问题，为精确计算滚动轴承摩擦力矩的动态性能奠定基础。用关联维数标准差刻画摩擦力矩的不确定性，用关联维数均值描述摩擦力矩非线性特征的演变历程。研究表明，滚动轴承属于确定的非线性动力学系统，但其摩擦力矩呈现出明显的不确定性。随着转速的增加，滚动轴承摩擦力矩关联维数标准差与均值都呈现出非线性增大的趋势。
Prediction of Friction Stir Welding Characteristic Using Neural Network
Friction stir welding Mechanical properties ANN
2010/1/15
An artificial neural network (ANN) model was developed for the analysis and simulation of the correlation between the
friction stir welding (FSW) parameters of aluminum (Al) plates and mechanical pro...
Physico-chemical characteristic of aluminum alloy castings manufactured with cores containing fly ash as a base material
Innovative foundry materials and technologies Fly ash Aluminum alloy Structure
2011/3/15
Castings were poured from PA9 aluminum alloy. Cores in the form of standard cylindrical specimens were made from the core mixture based on fly ash of the identified chemical and granular composition.