搜索结果: 1-15 共查到“黑色金属及其合金 structure”相关记录19条 . 查询时间(0.256 秒)
Influence of continuous casting conditions on grey cast iron structure
Casting Cast iron Graphite Electromagnetic field
2010/8/17
Forced convection of liquid metal in the traditional mould or in the continuous casting mould has a significant influence on the crystallization process of castings. For many years, the device whose m...
Structure and properties of forming austenitic X5CrNi18-9 stainless steel in a cold working
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/14
Purpose: The aim of the paper is to analyze the influence of the degree of rolling reduction on the structure forming and changes of mechanical properties in cold-rolled sheet-metals of austenitic X5C...
Structure and properties of CuFe2 alloy
Metallic alloys Functional materials Metallography
2009/12/14
Purpose: The objective of this work was to investigate the changes taking place in the structure and properties of CuFe2 alloy caused by combined heat treatment and metal working. The objective of thi...
The influence of simultaneous impact of temperature and time on the properties and structure of X10CrWMoVNb9-2 steel
Mechanical properties Structure Degradation after exposure test
2009/12/14
Purpose: of this paper is to present the changes of the mechanical properties and structure in material components of the power station boiler after long-lasting annealing made of X10CrWMoVNb9-2 steel...
Cold worked high alloy ultra-high strength steels with aged martensite structure
Metallic alloys High alloy steels Cold working
2009/12/14
Purpose: The study on structure-property relations of heavily cold worked and aged martensite in two high-alloy structural steels was presented. The aim was to understand properties of the sheet produ...
Influence of severe plastic deformation by the ECAP method on structure and properties of the P2-04BCh steel
Nanomaterials Low-carbon steel ECAE deformation
2009/12/3
Purpose: Maim aim of this paper is to describe the plastic deformation executed by ECAE of low carbon steel. The ECAE method lead to significant improvement of strength of investigated material.
Desi...
Purpose: Main aim of this paper is to describe the plastic deformation executed by ECAP on low cycle fatigue
of steel AISI 316. Among others was attention fixed on mechanical properties after this tr...
Structure of the gradient carbide steels of HS 6-5-2 high-speed steel matrix
Tool materials Uniaxial pressing Sintering, High-speed steel
2009/12/1
Purpose: The goal of this work is to obtain gradient carbide steels based on a high-speed steel reinforced with
tungsten carbide.
Design/methodology/approach: The materials were fabricated using the...
Structure and properties of the gradient tool materials of unalloyed steel matrix reinforced with HS6-5-2 high-speed steel
Gradient tool materials Pressureless powder forming High-speed steel
2009/12/1
Purpose: The goal of this work is to obtain the gradient materials based on the non-alloyed steel reinforced highspeed
steel using the pressureless formed method.
Design/methodology/approach: The no...
Structure and properties of Fe-Co-Ni-B-Si-Nb alloy prepared by mechanical alloying method
Metallic alloys Powder metallurgy Mechanical alloying
2010/2/4
Purpose: The goal of this work is to investigate structure and properties of Fe57.6Co7.2Ni7.2B19.2Si4.8Nb4 powders alloys obtained by mechanical alloying.
Design/methodology/approach: The test materi...
Structure and magnetic properties of Fe36Co36B19Si5Nb4 bulk metallic glasses
Amorphous materials Bulk metallic glasses Soft magnetic properties
2010/2/4
Purpose: The work presents a microstructure characterization, thermal stability and soft magnetic properties analysis of Fe-based bulk metallic glasses.
Design/methodology/approach: The studies were ...
The influence of thermomechanical treatment on structure of FeAl intermetallic phase - based alloys
Metallic alloys Deformation Hot rolling
2010/2/4
Purpose: The major problem restricting universal employment of intermetallic phase base alloy is their low plasticity which leads to hampering their development as construction materials. The followin...
Effect of increased nitrogen content on the structure and properties of tool steels
Tool materials Quantitative metallography Crack resistance
2010/2/4
Purpose: The influence is analysed of an increased nitrogen content in the range of 0.03-0.09% on stereological features of the microstructure, the principal mechanical properties, crack resistance an...
Quantitative evaluation of the structure and properties of hot rolled products of continuous ingots made of low-carbon steels
Metallic alloys Plastic forming Mechanical properties
2010/2/8
Purpose: The paper presents influence of degree processing for parameters of the structure and properties of products after hot rolling of continuous ingots made of low carbon steels.
Design/methodol...
Influence of increased nitrogen content on tool steels structure and selected properties
Tool materials Metallography Crack resistance
2010/2/8
Purpose: The paper addresses the problem of determining the influence of an increased nitrogen content in the range 0.03-0.09% on the structure and selected functional properties of melts made of X155...