搜索结果: 1-10 共查到“金属材料 Solidification”相关记录10条 . 查询时间(0.059 秒)
Properties of Melt and Thermal Processes during Solidification in Jewellery Casting
Melt Thermal Processes Jewellery
2009/7/29
A survey is made of the significant thermal properties pertaining to liquid and solidifying jewellery alloys,and some properties of the investment are also considered. Values found in the literature, ...
Influence of solidification rate on microstructure of gravity cast AZ91 magnesium alloy
AZ91 magnesium alloy gravity casting ATD microstructure
2011/4/7
Derivative thermal (ATD) and microstructure analyses of gravity cast AZ91 magnesium alloy are presented. The alloy was cast into cold steel and sand moulds with the same dimensions. ATD curves–solidif...
Kinetic model of ductile iron solidification with experimental verification
Modeling Ductile iron Solidification process
2011/4/1
A solidification model for ductile iron, including Weibull formula for nodule count has been presented. From this model, the following can be determined: cooling curves, kinetics of austenite and eute...
Solution of the solidification problem by using the variational iteration method
Solidification process Application of information technology to the foundry industry Stefan problem Moving boundary problem Variational iteration method
2011/4/1
The paper presents the approximated solution of the solidification problem, modelled with the aid of the one-phase Stefan problem with the boundary condition of the second kind, by using the variation...
The analysis of solidification process of ferritic-austenitic cast steel
Innovative foundry materials and technologies Duplex cast steel Solidification Segregation DDTA
2011/3/29
One of the most common defects leading to the rejection of faulty castings made of duplex cast steel is hot cracking. Hot cracking – differently from cold cracking which occur on cooling, when the ma...
The analysis of solidification process of ferritic-austenitic cast steel
Innovative foundry materials and technologies Duplex cast steel Solidification Segregation DDTA
2011/3/29
One of the most common defects leading to the rejection of faulty castings made of duplex cast steel is hot cracking. Hot cracking – differently from cold cracking which occur on cooling, when the ma...
Analysis of permeability of interdendritic channels during solidification of aluminum magnesium alloys
Solidification Permeability Al-Mg alloys
2010/2/4
Design/methodology/approach: Al-Mg alloys with 5, 10 and 15 wt% Mg were submitted to unidirectional solidification leading to a columnar dendritic structure. From the samples obtained, the primary and...
期刊信息
篇名
Phase-field simulations of solidification of Al-Cu binary alloys
语种
英文
撰写或编译
作者
LONGWenyuan,CAI Qizhou CHEN Liliang,WEI Bokang
第一作者单位
刊物名称
Trans. Nonferrous Met
页面
14.291-296.2004.4
出版日期
...
Numerical model of the solidification of alloys with natural convection of the liquid
Solidification process Foundry technologies Finite element method
2011/3/15
The paper deals with comparison of numerical analysis results obtained for binary alloys solidification process in the sand and permanent mould with motion of the fluid in the liquid and mushy zone. T...
Model of pure metal solidification using the power-type function
Numerical techniques Solidification of metals Micro/macro models
2010/2/22
Design/methodology/approach: The local and temporary volumetric fraction of solid state is described by the equation from which both the linear and exponential model can be obtained. Introducing the a...