搜索结果: 1-12 共查到“材料科学基础学科 Water”相关记录12条 . 查询时间(0.187 秒)
Who needs water to assemble DNA?Non-aqueous solvent supports DNA nanotechnology
Who needs water to assemble DNA Non-aqueous solvent DNA nanotechnology
2015/6/2
Researchers at the Georgia Institute of Technology have now shown that they can assemble DNA nanostructures in a solvent containing no water. They also discovered that adding a small amount of water t...
Topography of material made by the application of abrasive water jet technology
abrasive flow feed rate cutting by abrasive water jet
2015/5/5
Water jet cutting technology is widely applicable in all industrial areas in areas where the need for high
dimensional precision machined material. Quality of surface corresponds to the scale from m...
Water induced evolution of dielectric and micro-structural properties of rice starch
Bio-polymers Micro–granular matter Water uptake
2010/1/11
Changes of mass of bio-polymeric-granular sample occurring during its exposition on saturated water vapour at room temperature, was recorded in the time. The ε′ evolution was recorded by means of frin...
Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics
intermetallic compounds iron aluminides water vapor
2010/1/19
Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr,Mo,Nb) were oxidized at 950 °C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation ...
The abrasive wear behaviour of alloy cast steel in SiC-water slurry
Wear resistance cast steel Hadfield cast steels Wear resistance
2011/4/1
The results of abrasive wear tests carried out in an environment of SiC-water slurry on four grades of cast steel, i.e. carbon cast steel with microadditions of vanadium, low-alloy L70H2GNM cast steel...
Water mist effect on cooling process and microstructure of silumin
Innovative materials and casting technologies Cooling Water mist Die casting Silumin
2011/3/31
The paper presents the results of the process of crystallization and cooling of the AlSi11 silumin and temperature distribution in the wall of iron and bronze research casting die in the temperature ...
Water mist effect on cooling process and microstructure of silumin
Innovative materials and casting technologies Cooling Water mist Die casting Silumin
2011/3/31
The paper presents the results of the process of crystallization and cooling of the AlSi11 silumin and temperature distribution in the wall of iron and bronze research casting die in the temperature ...
The cross-linking influence of electromagnetic radiation on water-soluble polyacrylan compositions with biopolymers
biopolymer binders cross-linking microwaves moulding sands
2011/3/29
The results of examinations of the cross-linking influence of electromagnetic radiation - in a microwave range – on polyacrylan compositions with biopolymers, are presented in the hereby paper. The c...
The cross-linking influence of electromagnetic radiation on water-soluble polyacrylan compositions with biopolymers
biopolymer binders cross-linking microwaves moulding sands
2011/3/29
The results of examinations of the cross-linking influence of electromagnetic radiation - in a microwave range – on polyacrylan compositions with biopolymers, are presented in the hereby paper. The c...
The kinetics of activation and deactivation in the process of water ozonising used for advanced oxidation of the dust waste from moulding sands
bentonite sands toxic compounds advanced oxidation ozone kinetics of dissolution
2011/3/29
Adding coal dust and organic carriers of the lustrous carbon to bentonite-bonded moulding sands in amounts justified by the technological regime and the use of cores and protective coatings based on o...
The kinetics of activation and deactivation in the process of water ozonising used for advanced oxidation of the dust waste from moulding sands
bentonite sands toxic compounds advanced oxidation ozone kinetics of dissolution
2011/3/29
Adding coal dust and organic carriers of the lustrous carbon to bentonite-bonded moulding sands in amounts justified by the technological regime and the use of cores and protective coatings based on o...
Corrosion resistance of FeAl intermetallic phase based alloy in water solution of NaCl
Metallic alloys Corrosion Microstructure
2010/2/8
Purpose: Recognizing of corrosion mechanisms in liquid mediums can lead to obtain corrosion-proof material e.g. by applying passivation phenomenon. In this paper attention was paid to determine the co...