搜索结果: 1-15 共查到“材料科学 Deformation”相关记录43条 . 查询时间(1.109 秒)
Magneto-induced large deformation and high-damping performance of a magnetorheological plastomer
magnetorheological plastomer magneto-damping effect magneto-mechanical
2015/3/24
A magnetorheological plastomer (MRP) is a new kind of soft magneto-sensitive polymeric composite. This work reports on the large magneto-deforming effect and high magneto-damping performance of MRPs u...
Influence of Shear Deformation on the Normal Force of Magnetorheological Elastomer
Polymers Magnetic materials Microstructure Magnetorheologicalelastomer Shear deformation Normal force
2015/3/24
The influence of shear deformation on the normal force of magnetorheological elastomer was investigated.In quasi-static shear,the normal force decreases with increasing shear strain at low magnetic fi...
Influence of Shear Deformation on the Normal Force of Magnetorheological Elastomer
Polymers Magnetic materials Microstructure Magnetorheologicalelastomer Shear deformation Normal force
2015/3/24
The influence of shear deformation on the normal force of magnetorheological elastomer was investigated.In quasi-static shear,the normal force decreases with increasing shear strain at low magnetic fi...
Investigating the confining compressibility of STF at high deformation rate
Separated hopkinson pressure bar thickening fluid compressibility high strain rate
2015/3/27
The split Hopkinson pressure bar (SHPB) was used to study the compressibility of shear thickening fluid (STF) at high deformation rate. In this study, a steel bulk was introduced into the SHPB system ...
Full-field deformation of magnetorheological elastomer under uniform magnetic field
Digital holographic interferometry analysis of the magnetorheological elastomers morphological transformation
2015/3/27
A digital holographic interferometry was applied to analyze the morphology transformation of the magnetorheological elastomer, and both the contraction and stretch deformation were observed under appl...
Resistance to time-dependent deformation of polystyrene/carbon nanotube composites under cyclic tension
Polymer–matrix composites Creep Electron microscopy Extrusion
2015/3/30
Materials subject to cyclic stress can succumb to fatigue, causing failure at stress levels much lower than those in static loading cases. Herein we discussed the viscoelastic behaviors of polystyrene...
Effect of deformation-induced martensite on the microstructure, mechanical properties and corrosion resistance of X5CrNi18-8 stainless steel
Austenitic stainless steel Plastic deformation Mechanical properties Weight loss method H2SO4 solution
2010/8/17
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
AgSnBi powder consolidated by composite mode of deformation
AgSnBi powder consolidated composite deformation
2010/8/12
Owing to their high electrical and thermal conductivities, high resistance to arcing, high welding adhesion resistance, low contact resistance, high hardness and strength, silver metal oxides (Ag/MeO)...
Effect of Cyclic Deformation on Magnetorheological Elastomers
Magnetorheological elastomer Fatigue cis-polybutadiene rubber In situ observation
2015/3/30
Fatigue properties of magnetorheological elastomer (MRE) samples were investigated based on cis-polybutadiene rubber by using a fatigue test machine. Three MRE samples with iron particles mass fractio...
The influence of initial plastic deformation on microstructure and hot plasticity of α+β titanium alloys
Titanium alloys Thermomechanical process Hot deformation Heat treatment β-solution
2010/8/17
Two phase titanium alloys most often are hot deformed, mainly by open die or die forging. Achievement of desired mechanical properties is related to development of proper microstructure in plastic wor...
Influence of change of direction of deformation at ECAP technology on achieved UFG in AlMn1Cu alloy
Plastic Forming ECAP process of AlMn1Cu alloy Structure analysis
2009/12/14
Purpose: of this paper is to extend a complex evaluation of aluminium alloy, which requires very often knowledge of behaviour of deformation at the ECAP process and achieved strengthening, intensity o...
The influence of the temperature of plastic deformation on the structure and mechanical properties of copper alloys CuCo2Be and CuCo1Ni1Be
Metallic alloys Copper alloy Plastic instability Portevin–Le Chatelier effect
2009/12/3
Purpose: The aim of the paper is to determine the influence of temperature of plastic deformation on the structure and mechanical properties of copper alloy of the CuCo2Be and CuCo1Ni1Be during a tens...
Influence of severe plastic deformation by the ECAP method on structure and properties of the P2-04BCh steel
Nanomaterials Low-carbon steel ECAE deformation
2009/12/3
Purpose: Maim aim of this paper is to describe the plastic deformation executed by ECAE of low carbon steel. The ECAE method lead to significant improvement of strength of investigated material.
Desi...
Structure of the copper under controlled deformation path conditions
Nanomaterials Plastic forming Microstructure
2009/12/3
Purpose: One of the methods of plastic deformation under complex deformation path conditions is compression with oscillatory torsion. The observable effects in the form of changing force parameters an...
Structure of the copper under controlled deformation path conditions
Nanomaterials Plastic Forming Microstructure
2009/12/3
Purpose: One of the methods of plastic deformation under complex deformation path conditions is compression with oscillatory torsion. The observable effects in the form of changing force parameters an...