搜索结果: 1-15 共查到“材料科学 Corrosion”相关记录63条 . 查询时间(0.046 秒)
Corrosion can improve materials’ durability
腐蚀 材料科学 耐用性
2023/5/23
When it comes to the integrity of structural alloys, a little corrosion may sometimes be a good thing.
2017年高温腐蚀高登研究研讨会（The Gordon Research Seminar on High Temperature Corrosion）
2017年 高温腐蚀高登 研讨会
2017/3/7
Applications for this meeting must be submitted by June 10, 2017. Please apply early, as some meetings become oversubscribed (full) before this deadline. If the meeting is oversubscribed, it will be s...
Effect of deformation-induced martensite on the microstructure, mechanical properties and corrosion resistance of X5CrNi18-8 stainless steel
Austenitic stainless steel Plastic deformation Mechanical properties Weight loss method H2SO4 solution
2010/8/17
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
Modelling of fracture process in concrete reinforced structures under steel corrosion
Modelling fracture process concrete reinforced structures steel corrosion
2010/8/12
Development of non-destructive methods of rebar corrosion control in a reinforced concrete is essentially important for a practice. Of the known approaches the most prospective are regarded those base...
Corrosion of evaporator tubes in low emission steam boilers
Corrosion Low-emission steam boiler Evaporator tubes Sulfide corrosion
2010/8/17
Corrosion of water walls is the serious problem in low-emission coal fired boilers operation. Modification of combustion process was developed for limitation nitride oxides (NOx) emission. Ashes and s...
Influence of cold rolling on the corrosion resistance of austenitic steel
cold rolling corrosion resistance austenitic steel
2010/8/12
The existing demand for materials with high functional properties, a definite geometrical shape, a high resistance to the destructive effect of a aggressive environments, produced in
compliances with...
Corrosion behaviour of the welded steel sheets used in automotive industry
Corrosion behaviour welded steel sheets automotive industry
2010/8/12
The enormous usage of thin steel sheets for automotive application for reducing car weight necessitates improved material strength in addition to higher corrosion protection. Hot dip galvanizing of st...
Corrosion resistance of high-manganese austenitic steels
Corrosion resistance High-manganese steels TWIP-effect Immersion test General corrosion Corrosion pits
2010/8/17
High-manganese austenitic steels belong to the second generation of modern high strength steels for automotive industry [1]. Their mean advantage over first generation steels with a matrix based on A2...
Corrosion behaviour of Fe-Mn-Si-Al austenitic steel in chloride solution
Corrosion resistance Thermo-mechanical processing High-manganese steels
2009/12/14
Purpose: The aim of the paper is to investigate the corrosion behaviour of the new-developed high-manganese austenitic steel in 0.5n NaCl solution.
Design/methodology/approach: The steel used for the...
Pitting corrosion in the wet section of the automotive exhaust systems
Metallic alloys Pitting corrosion Evaluation methods for pitting corrosion
2009/12/14
Purpose: In the rear section of the automotive exhaust systems condensates bearing appreciable chloride ion concentrations and often low pH-values together with particles of electrochemical active soo...
Effects of particle size distribution on the refractory properties and corrosion ultra-low cement castables
Ultra-low cement castables (ULC) Particle size distribution Rheolology Slag penetration
2009/12/2
Design/methodology/approach: In this study the effect of particle size distribution on refractory properties of
ultra-low cement castables was investigated. Secar 71 cement was used as a binder. The ...
Corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9 – PE type in acid environment
Composites Corrosion resistance
2009/12/2
Purpose: The purpose of the paper is to present corrosion resistance of composite materials Fe73.5Cu1Nb3Si13.5B9
– PEHD type in acid environment.
Design/methodology/approach: Composite materials Fe7...
Corrosion resistance of metallic implants used in bone surgery
Biomaterials Pitting corrosion Biocompatibility
2009/12/2
Purpose: The purpose of the research was analysis of influence of mechanical damages on the implants’ surface
made of Cr-Ni-Mo steel on the pitting corrosion resistance. Analysis was performed for im...
The surface self-organization in process friction and corrosion of composite materials
Composites Corrosion Surface
2009/12/2
Purpose: The analysis of numerous phenomena that concern the possibilities of metal surface self-organization
in friction and corrosion processes.
Design/methodology/approach: The design of structur...
Crevice corrosion resistance of NiTi alloy after various surface treatments
Metallic material Biomaterials Corrosion
2009/12/2
Purpose: The aim of the work was determination of crevice corrosion resistance of NiTi alloy after various
surface treatments.
Design/methodology/approach: The evaluation of the electrochemical beha...