搜索结果: 1-4 共查到“林业工程 capacity”相关记录4条 . 查询时间(0.042 秒)
Analysis of woodchip heating capacity calculated according to technical standards and measurements of calorific value
wood chips heat capacity caloric value relative moisture
2015/5/5
Woodchip sampling may be done according to two methodologies, based on the volume or calorific
value of the fuel. The paper compares heating values obtained through relative humidity measurements ac...
Determination of loading capacity depending on bevel angle of the wooden bonded scarf joint
scarf joint bonded joint wood loading capacity Mohr's circle
2014/2/26
The paper is focused on comparison of experimental and simple theoretical method of determination of loading capacity depending on bevel angle of wooden bonded scarf joint. The Mohr's circle principle...
Bending Moment Capacity of Metal Plate Connected Wood-Splice Joints Constructed with Red Pine（Pinus brutia Ten.）Lumber
MPC splice joints bending moment capacity red pine
2009/1/9
The ultimate bending moment carrying capacity of metal-plate-connected (MPC) wood-truss-splice joints constructed with red pine (Pinus brutia Ten.) lumber was investigated. Lumber 38 mm by 90 mm and ...
Report of the workshop on capacity-building for the implementation of the CITES Appendix-II listing of mahogany
trade work capacity-building CITES Appendix-II
2014/3/6
This report presents the results of the workshop on capacity-building for the implementation of the CITES Appendix-II listing of mahogany.