搜索结果: 1-10 共查到“木材加工与人造板工艺学 Particleboard”相关记录10条 . 查询时间(0.087 秒)
Manufacture and Properties of Gypsum-Bonded Particleboard III
gypsum-bonded particleboard kenaf fiber incombustibility
2009/3/6
Gypsum-bonded particleboards overlaid with kenaf bast fiber mats on top and bottom surfaces were manufactured. The effects of the kenaf fiber overlay on the mechanical and dimensional properties of th...
Manufacture and Properties of Gypsum-Bonded Particleboard IV.
gypsum-bonded particleboard waste gypsum boards amount of mixing water
2009/3/6
In order to study the recycling of waste gypsum boards, gypsum-bonded particleboards were manufactured by using the gypsum hemihydrate calcined from waste gypsum boards, and the mechanical properties ...
Development of Innovative Particleboard Panels
lightweight particleboards annual/perennial farm plants wood chips binder mechanical and moisture related properties
2009/2/25
One aim of a joint European project called DIPP (Development of Innovative Particleboard (chipboard) Panels for a better mechanical performance and a lower environmental impact) is the development o...
Effects of Surface Coating Materials on The Physical and Mechanical Properties of Particleboard Used For Kitchen Cabinets and Surface Quality Properties: Part 1. Effects of Physical Properties
Surface Coating Materials The Physical and Mechanical Properties Particleboard Kitchen Cabinets Surface Quality Properties
2009/1/15
In this study, the effects of surface coating materials on the physical and mechanical properties of particleboard used for kitchen cabinets and surface quality properties were investigated. But, in t...
An Operations Research Application in the Particleboard Industry
Particleboard Industry Production Planning Linear Programming Product Mix
2009/1/14
In this study, a model was used for the optimization of product mix (the amounts of each product in the mixture) in particleboard industry by using linear programming. A theoretical model was construc...
Factors Affecting the Production of E1 Type Particleboard
E1 type particleboard technological properties manufacturing variables
2009/1/13
This study aimed to determine the best manufacturing variables for the high physical and mechanical properties, and formaldehyde emission of particleboards produced from E1 type adhesive. In the prod...
Effects of Surface Coating Materials on the Thermal Conductivity and Combustion Properties of Particleboard
melamine paper lacquered paint wood veneer continue press laminate thermal conductivity combustion properties
2009/1/13
The specific properties of particleboard samples used in this study were as follows: 280x210x1.8 cm dimensions, 0.68 g/cm3 specific gravity. Produced boards were coated with lacquered paint, melamine...
Effects of Some Manufacturing Factors on the Properties of Particleboard Manufactured from Alder（Alnus glutinosa subsp. Barbata）
Particleboard Alder (Alnus glutinosa subsp. Barbata) Static Bending Modulus of Elasticity Internal Bond Thickness Swelling Manufacturing Factors
2009/1/13
In this study, Alder (Alnus glutinosa subsp.Barbata) wood was used for particleboard manufacturing. The purpose of this study was to determine the effects of particle moisture content, shelling ratio ...
Studies on Lignin-Based Adhesives for Particleboard Panels
Organosolv lignin lignin-phenol-formaldehyde resin methylolation tensile strength physical properties particleboard
2009/1/13
The ultimate aim of this work was to develop a phenolic resin for partially replacing phenol with modified organosolv lignin in phenol-formaldehyde (PF) resin production. The lignin-formaldehyde relat...
Effects of Mimosa Bark Usage on Some Properties of Particleboard
Particleboard mimosa bark formaldehyde emission mechanical properties physical properties
2009/1/12
The objective of this study was to determine the effect of mimosa bark usage on the formaldehyde emission, physical and mechanical properties of particleboard. Fifteen panels from black locust (Robini...